New to Framing? get started here
952 Rivet Setting Tool and Anvil Disc Set



952 Rivet Setting Tool and Anvil Disc Set
For fixing D Rings to backing board with 2 Part rivets
For efficiency, first set the anvil disc into a shallow hole in a piece of chipboard or similar.
Then, punch or drill the 3mm hole in board and insert domed top part of rivet through D Ring and board. Push longer bottom part up into rivet. Position board over anvil disc. Use setting tool with light hammer.
The domed head looks attractive with a matching D Ring and the tubular bottom part leaves a smooth finish on the back of the board.
Setting Tool is 59mm x 11mm dia. Anvil is 22mm dia, 5mm thick. Made in UK
See also:
953 Rivets 2 Part Nickel Plated 500 pairs
953A Rivets 2 Part Bronze Plated 500 pairs
951 Hole Punch 3mm for board and MDF 102mm x 8mm dia
More info:
When correctly installed, a two-part rivet should take up to 2kg, but always test.
Product information updated November 2020
Also in the Range View Range
More Like This
Questions
Please feel free to ask any questions about this product.