9985 P515 Flexipoint Driver Air Operated

Air operated P515 Flexipoint Driver from LION which fires 15mm flexis, Standard or Semi-rigid

The specially engineered nose-plate allows flexis to be fired almost flat, just 10° up. It also allows operators to move the driver sideways without pulling back, enabling much faster working.

- Side loading 105mm magazine takes strips of up to 300 flexis

- Special nose plate loosens easily to clear jams

- Die-cast aluminium, 0.85kg. Approximately 195mm x 165mm

- Rubberised hand grip

- Operates at 4-7 bar / 70psi. Connect through a separate regulator

- Full parts and service support

- CE approval Certificate, 50146294 00, issued by TUV Rheinland

See also

Framers Points and Flexipoints

Air Tool Balancers

More info

Flexis jammed? If you get a jam, try removing the flexis strip, turning it end-to-end and re-inserting it. The manufacturing process means that the edge of each tab has a very, very, slight burr in one direction. Users might be able to feel the difference by rubbing a finger tip over the two ends of the strip. 

The product guarantee is void if damage is caused by dropping. We recommend that if possible, the air-op flexi driver is hung from a tool balancer. This also makes for safer operation with less risk of tripping over the air-line.