6927B CWH3 Hanger for Aluminium Frames 200 pack

CWH3 Hanger - suitable for most aluminium frame profiles

Fits easily into the channel of most double-plate aluminium frame profiles. Adjusted with two screws, included. Hang CWH hangers directly on hooks or screws. No need to use picture cord or wire.

Fit in 4 simple steps: 

1)  Fix CWH Hangers to frame. Position and mark approximately 1/3 of the way down from the top. Put one screw in an oval hole of each.

2) Position and fix the wall hooks, place two Post-its in approximate hook positions. Check and mark hook positions on Post-its. Hold hook in position on mark. Use a light hammer to insert pins.

3) Hang frame in place on the hooks. Check for general position. To adjust for level, use screw in a slot. To lock CWH Hangers in position, insert second screw in each.

4) Frames hang flat and level on the wall - do not tip forward.

Safe working load, based on our tests: 11kg (when used in pairs)

Screws in CWH3 Square Sawtooth Hangers

Screws included in this pack are sometimes slotted and sometimes cross headed. If slotted use a well-fitting flat bladed screwdriver. If cross-headed use a PH-2 screwdriver head.

The name, style, concept and detail of all CWH Hangers are parts of an original idea which is © 2009 LION PFS Ltd. All rights reserved.