7508 Mountcutter Blades for Thicker Board SE 0.015" pack 100

Finest quality mountcutter blades precision made from 1.5% carbon steel in Sheffield, England.

SE single edge blades are good for cutting thicker boards such as 8 ply mountboard

Suit most mount cutters which use rectangular blades, including KEENCUT, FLETCHER and C&H Also fit Rapier, Art Mac, Signature etc.

0.015"/0.38mm thick, SE, ground one side  Box of 100

These mountcutter blades are not oiled, just like most mountcutter blades. This removes the chance of smudges of oil appearing on the mountboard surface during the first few cuts. The absence of oil may make them vulnerable to surface corrosion in damp or humid environments. See PUB109 for more info. 

See also:

1930    Lion 0.012” D Mountcutter blades pack 100

1930B  Lion 0.012” SE Mountcutter blades pack 100

1930A  Lion 0.015” D Mountcutter blades pack 100

PUB109  Information sheet on storing and using mountcutter blades in humid and hot conditions

Product information updated April 2020