New to Framing? get started here
7828 Alfamacchine Flexipoints 15mm Semi Rigid 6,000 Box





Quantity Discounts
Specification: Semi Rigid
7828 Alfamacchine Flexipoints 15mm Semi Rigid 6,000 Box
These silver semi-rigid flexipoints are bonded along the sides into strips for easy handling
Semi-Rigid flexipoints are fired into the back of a frame against the backing board. They push down to hold the glass, artwork and backing in place. They differ from Standard flexis as they are made of a higher grade of steel which is more resistant to bending, so are more often used in framing where the back is less likely to be opened.
They fit LION P515, Inmes FI-150M, FP-150, Cassese, Flex 0.4, Omer, Tabmaster, T-220 and similar flexi drivers. They do not fit Fletcher drivers.
Standard flexis are to the internationally accepted size of 15mm x 4.5mm and these are 0.4mm thick with a silver finish. Made in Italy.
More info:
Loading flexis into your driver: The high-speed pressing process in manufacturing makes each one very, slightly rounded one way at the edges. If you find that they jam in your driver, try re-inserting them the other way round.
Downloads
PUB110 Flexipoint Driver Air op P515 Manual.pdf - 894.01 KB
Also in the Range View Range
Questions
Please feel free to ask any questions about this product.